Pumps & Rainwater Tank Accessories

Brumby Water Tanks supply two ranges of pumps for our water tanks, the Brumby Premium Range and the Brumby Standard Range. Se below for more information.

Premium Range	Standard Range
APPLICATIONS Provides reliable pressure boosting and water supply while minimising annoying shower temperature fluctuations.	APPLICATIONS Ideal for one or multiple tap outlets to your garden, toilet and laundry the Grundfos JPRain range off ers a reliable solution to help you utilise your collected rainwater in the best possible way.
FEATURES • CH-PC incorporates dry run protection • Quiet operation • Vital parts made of stainless steel for a long life • Built-in thermal protection (1 x 240 V) • Electrophoresis coating to resist corrosion	FEATURES • JPRain MP Range • Self priming from bore and rainwater tank • Strong suction capacity • Automatic on/off switch • Built in thermal protection • Suitable for above or under ground rainwater tanks • Handles small sandy impurities with ease
CONSTRUCTION • Stainless steel impellers, intermediate chambers and shaft • Carbon / ceramic seal • IP54 motor • Insulation Class F • Maximum ambient temperature: + 55 °C	CONSTRUCTION • Technopolymer pump body • Carbon/ceramic mechanical seal • AISI 304 stainless steel shaft • 1 x 240V, IP44 motor • Insulation Class F, with built-in overload protection
PERFORMANCE Pumps Discharge Pressure (kPa/psi) - based on zero suction lift 150 200 250 300 350 400 450 22 29 36 44 51 58 65 Output (l/min) CH2-40 PC15 54 49 40 27 16 - - CH2-50 PC15 54 49 46 37 30 21 - CH2-60 PC22 57 53 48 44 37 30 44	PERFORMANCE Pumps Discharge Pressure (kPa/psi) - based on zero suction lift 150 200 250 300 350 400 500 22 29 36 44 51 58 72 Output (l/min) JPB2 MP 46 39 30 - - - - JPB3 MP - 58 40 29 - - - JPB4 MP - - 58 44 - - -
DIMENSIONS	DIMENSIONS

PREMIUM RANGE TECHNICAL FEATURES

STANDARD RANGE TECHNICAL FEATURES

The JPRain MP (Standard Range) is a complete system which automatically switches on and off according to demand. The controller also has dry run protection to stop the pump if the tank runs dry. When small system leaks are present the MP will prevent cycling of the pump.

ADDITIONAL ACCESSORIES - GRUNDFOS PUMP GENIE®

APPLICATIONS
The Grundfos Pump Genie is an interconnect device that allows you to save precious drinking water by using your harvested rainwater for toilet, laundry and garden applications.
Always prioritising the use of rainwater, the Pump Genie will automatically switch over to a mains water source when your rainwater tank is running low, or during electrical failure.
The pump itself is only active when the rainwater is being drawn from the tank. It does not operate when the Pump Genie has switched to mains water. The pump controller automatically starts and stops the pump when a demand is sensed – for example, fl ushing a toilet or fi lling a washing machine.

FEATURES
• Easy to install
• Does not require any regular maintenance
• Dual check valve for backfl ow prevention
• Suitable for above or below ground rainwater tanks
• Will automatically switch to mains water in the event of a power failure
• 10 m rainwater tank fl oat leads as standard

CONSTRUCTION
• The Grundfos Pump Genie has Water Mark Approval
• Complies with ATS 5200.030 and AS/NZS 4020 – Testing of products for use in contact with drinking water
• Always install horizontally and under a cover to protect it from the elements
• The unique plug and sockets are IP65

OPTIONS
The Grundfos Pump Genie is available in a number of confi gurations:
• Grundfos CH-PC with Pump Genie – Grundfos Pump Genie interconnect device fi tted to the reliable CH-PC pressure system
• Grundfos Hilift with Pump Genie - Grundfos Pump Genie interconnect device fi tted to submersible Hilift 35 and Presscontrol for in tank pump installations with either a wall or tank mount kit
• Grundfos Pump Genie Retrofi t - Grundfos Pump Genie interconnect device as a Retrofi t Kit to add to existing Grundfos pressure system installations

TECHNICAL FEATURES
• Max flow rate (mains) 60 l/min
• Max flow rate (pump) as provided by the Grundfos pump
• Max mains water pressure 600 kPa
• Max pump pressure should not exceed 600 kPa
• Max water temperature continuous 50 °C
• Min operating temperature -5 °C
• Mains water inlet size via dual check value ¾” BSP (F)
• Outlet size ¾” BSP (F)
• Rainwater inlet size 1” BSP (F)
• Voltage: 1 x 240 V, 50 Hz

CH-PC WITH PUMP GENIE
The robust multistage design of the CH pumps makes its operation highly effi cient and whisper quiet. All movable parts in contact with the pumped liquid are made of stainless steel, making it especially suited to pressure boosting rainwater resources. The press control ensures that the pump is automatically started/stopped according to demand.

SELECT OPTION
With the addition of the Grundfos Select option, a tank only outlet is added to your Grundfos Pump Genie installation. This provides a tank only supply for outdoor use, and a tank with mains back up supply for your toilet and laundry use.

RETROFIT
The Grundfos Pumps Genie interconnect device is available as a retrofi t kit that can be purchased and added to an existing Grundfos pressure system that is drawing water from an above or below ground rainwater tank. The kit will contain a 400 mm LTW plugged lead, 25 mm union and 10 m fl oat. The 400 mm LTW lead will need to be wired into an existing press control or pressure switch by a registered electrician.